Birmingham Int'l Raceway (v1.1) for
NASCAR Racing 3 by Papyrus Design Group
and the Craftsman Truck Expansion Pack

Readme File
7/20/00


*****************************************
About This Document:

Thank you for downloading the Birmingham
International Raceway track. 

This document includes information that 
pertains to general problems and questions 
you may have concerning the track and/or
installation to your computer. Should you 
experience any problems with the BIR track, 
please refer to this file for additional help.
If you can not find your answer here, you 
can contact Tim McArthur (tmcarthur@email.com)
with your questions.

*****************************************

                  TABLE OF CONTENTS

              I.  MINIMUM REQUIREMENTS
             II.  GENERAL ISSUES
            III.  INSTALATION
             IV.  MULTIPLAYER
              V.  CONTACTING US
             VI.  SPECIAL THANKS


I. MINIMUM REQUIREMENTS
=======================
Windows 95/98

Minimum: Pentium 166, 32 MB RAM, 2X CD-ROM, 
SVGA 800x600 w/64k colors

Preferred: Pentium II, 64MB RAM, Glide or 
Direct3D supported 3D Hardware, Joystick 
or Steering Wheel & Pedals, A3D 2.0 Sound


II. GENERAL ISSUES
============================

Though we attempted to accuratley model the
actual BIR, there are some areas that we
were limited by the tools and game code
itself. For instance, the pit area which
actually resides between turns 3 and 4 do
not wrap around the turns on the real BIR,
nor do they pit two wide. Some sacrifices 
had to be made to allow the pit lane to 
handle more than just a few cars.

II. INSTALATION
============================

Direct the Installer to the Nascar
Racing 3 directory on your hard-drive.
The Installer will take care of the
rest.

Once installed, you will need to edit
your all.cal file and include the following
line:

##  5 15 0 0 BIR Magic_City_200 Magic_City_200 200 event3.tga biglogo3.tga


IV. MULTIPLAYER
==========================

BIR is multiplayer ready. Though internet
play through the WON.net service is not 
possible, you can still connect through
straight TCP or IPX connects to the BIR
track. Consult the Nascar Racing 3
Readme.txt for more information.


V.CONTACTING US
=======================

Track Created by:
Tim McArthur in cunjunction with
Turtle Works Inc.

Track distributed by Turtle Works Inc.
http://www.simcyberworld.com/html/twi/index.shtml

Birmingham International Raceway
http://www.b-i-r.com
http>//www.bir1.com

VI. SPECIAL THANKS
============================
To Darrell Young for the inspiration
to create BIR for Nascar Racing 3, and
to the folks at Turtle Works Inc and
Simcyberworld for the assistance and
technical knowledge to complete the
project. Thank you to Grady Thorton 
for the photos and track specs.



All content is copyright 1999-2000 by 
Turtle Works, Inc and may not be 
redistrubuted or reposted without the 
express permission of Turtle Works, Inc.
Niether Turtle Works Inc, nor Tim
McArthur can be held accountable for
any file loss or damage that this 
software may cause. The software comes
AS IS and the user installs at his/her
own risk.